思科 HWIC-2FE 10/100 高速WAN網路介面卡

HWIC-2FE Specifications

Manufacturer

Cisco

Part Number

HWIC-2FE

Device Type

Expansion module

Form factor

Plug-in module

The Fast Ethernet routed ports on the HWICs have the same characteristics and features as the onboard LAN interfaces for the integrated-services-router platforms. Along with Layer 3 connectivity, such as per-port access control lists (ACLs), routing, and IP addressing, these HWICs provide functions equivalent to those of onboard Fast Ethernet routed ports. 

Interfaces/Ports

2 x RJ-45 10/100Base-TX Auto-sensing/Auto-negotiating/Auto MDI/MDI-X

Data Transfer Rate

10 Mbps Ethernet

100 Mbps Fast Ethernet

Ethernet and VLAN

IEEE802.3 with IEEE802.2 Service Advertising Protocol (SAP)

IEEE802.3 with IEEE802.2 and Subnetwork Access Protocol (SNAP)

IEEE 802.1Q VLAN tagging

Autosensing, autonegotiation, and automatic media-dependent interface crossover  (Auto-MDIX)

 Unique MAC address (not shared with any other interface on the router), assigned MAC address to interface, and subinterfaces

Network Management Features

CiscoWorks

Simple Network Management Protocol (SNMP) support

Cisco NetFlow accounting

Additional Features

 IGMP, HSRP, GLBP, MPLS, GRE, IPv6, IPsec, L2TPv3, DHCP, NAT, GTS, MGCP, IBM, PPPoE, Bridging

MIBs Supported

ENTITY-MIB, IF-MIB, OLD-CISCO-CHASSIS-MIB, RMON-MIB, ETHERLIKE-MIB, CISCO-ENT-ASSET-MIB, CISCO-ENTITY-FRU-CONTROL-MIB

Agency Approvals

UL 1950, CSA-C22.2 #950, EN60950, TUV GS, IEC 950

Immunity

EN300386, EN55024 and CISPR24, EN50082-1

Emissions

FCC Part 15, Class A ICES-003, Class AEN55022, Class A CISPR22, Class AAS and NZS 3548, Class AVCCI, Class A EN 300386 EN61000-3-3 EN61000-3-2

Physical Specifications

Dimensions (W x D x H)

3.08 x 4.74 x 0.76 in.

Weight

2-Port: 0.16 lbs or 2.56 oz.

Environmental Specifications

Operating temperature: 32 to 104°F (0 to 40°C)

Storage temperature: -4 to 149°F (-20 to 65°C)

Relative humidity: 10 to 90%, noncondensing