NVIDIA MFP7E40-N007 passive fiber cable, SMF, MPO12 APC to 2xMPO12 APC, 7m

The MFP7E40 Fiber Cable is intended for interconnection of 2 compute or storage servers sharing a port in a high-speed switch in the data center.

全店，Free Shipping

{{shoplineProductReview.avg_score}} {{'product.product_review.stars' | translate}} | {{shoplineProductReview.total}} {{'product.product_review.reviews' | translate}}

{{amazonProductReview.avg_rating}} {{'product.product_review.stars' | translate}} | {{amazonProductReview.total_comment_count}} {{'product.product_review.reviews' | translate}}

一次最大商品購買數量限制為 99999

該數量不適用，請填入有效的數量。

售完

若想購買，請聯絡我們。

商品描述

送貨及付款方式

顧客評價

商品描述

Specifications

Name: NVIDIA MFP7E40-N007 passive fiber cable, SMF, MPO12 APC to 2xMPO12 APC, 7m
Brand: Nvidia
SKU: 6943ac0c9ade411ad6f5f468
Availability: InStock

Absolute Maximum Specifications

Absolute maximum ratings are those beyond which damage to the device may occur.

Prolonged operation between the operational specifications and absolute maximum ratings is not intended and may cause permanent device degradation.

Environmental Specifications

This table shows the environmental specifications for the product.

Parameter	Min	Max	Units
Storage temperature	-40	85	°C
Operating temperature	0	70	°C
Humidity	10	85	%RH

Mechanical and Optical Specifications

Table 2: Mechanical Specifications for MFP7E20-Nxxx

Parameter	Note	Value	Units
Tolerance on length,	Length < 10 m Length ≥ 10 m	-0/+0.2 -0/+0.5	m m
Number of Fibers		8
Cable diameter		3 ± 0.2	mm
Minimum bending radius	Anywhere on the cable	30	mm
Cable Jacket		Yellow, LSZH-OFNR
Topology	Crossed	Type B
Connectors and connector end face	Usconnect MTP Elite or Senko MPO/APC Low loss	APC, female
Insertion Loss, connector end face, IL	L=length {m}	≤0.35+0.0004 x L	dB
Return Loss, connector end face, RL		≥ 60	dB

Definition of Cable Length and location of splicing point:

Interconnection Scheme

The fiber which connects transceiver A’s lane 1 must end at transceiver B’s lane 12 at the other end of the link. This calls for a crossed MPO cable, commonly referred to as Type B.

MPO1 MPO/APC Female	Connection	MPO2 MPO/APC Female	MPO3 MPO/APC Female
1	---->	12	-
2	---->	11	-
3	---->	-	12
4	---->	-	11
5	Not Connected	-	-
6	Not Connected	-	-
7	Not Connected	-	-
8	Not Connected	-	-
9	<----	-	2
10	<----	-	1
11	<----	2	-
12	<----	1	-

Labels

Below is an example of the labels that are wrapped on each cable end.

Tail ‘1’ label shown as example. The other tail is marked ‘2’.

Warning

Images are for illustration purposes only. Product labels, colors, and lengths may vary.

Label Legend

Symbol	Meaning		Notes
YY	Year of manufacturing		2 digits
WW	Week of manufacturing		2 digits
XX	Manufacturer site		2 characters
ZZZZZ	Serial number		5 digits for serial number, starting from 00001. Reset at start of week to 00001.
Miscellaneous
ZZ	HW and SW revision		2 alpha-numeric characters
YYYY	Year of manufacturing		4 digits
MM	Month of manufacturing		2 digits
DD	Day of manufacturing		2 digits
COO	Country of origin		E.g. China or Malaysia
XXm	Cable length		Meter
		Quick response code	Serial number (MTYYWWXXSSSSS)

Note: The serial number and barcode are for NVIDIA internal use only.

Regulatory Compliance and Classification

The laser module is classified as class I according to IEC 60825-1, IEC 60825-2 and 21 CFR 1040 (CDRH).

Safety: CB, cTUVus, CE
EMC: CE, FCC, ICES, RCM, VCCI

Ask your NVIDIA FAE for a zip file of the certifications for this product.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.